CUSTOMER SERVICE 989.748.4145 info@dieselfreak.com

Intake Connection Kit

$279.00

 

Intake Connection Kit Includes

New Aluminum Top and Bottom Mounts for Intake Grid Heater

-New Grid Heater Gaskets

-New 2 ¼” x 2”  Silicone 90 degree 4 ply Boot

-New T304 Stainless steel T-Bolt clamps

 

For replacing the factory grid heater and intake mouth piece.

From the factory, every Roxor leaks boost from new. Which is loss of power and efficiency from the turbo to the engine. We have found this leak at as low as 2 psi of boost pressure. We found the factory pieces to be “egg” shaped or “out of round” and the mounting plates to be “warped” or not completely flat.

Our new pieces are CNC machined to tight specifications, completely flat and have internal O-rings for ultimate securement to the factory intake. We utilize the factory Grid heater for those cold start ups.  This is a direct bolt on piece that also utilizes the factory hold down bracket.

The top is a larger 2 ¼” pipe with “bead roll” compared to the factory smooth 2” round surface. We include the new Silicone Boot and clamps that will allow for easy connection. The Silicone boot may need to be trimmed to size for length, this can be done easily with a razor knife.

Fits Roxor 2018, 2019 & 2020

 

 

Intake Connection Kit Includes

New Aluminum Top and Bottom Mounts for Intake Grid Heater

-New Grid Heater Gaskets

-New 2 ¼” x 2”  Silicone 90 degree 4 ply Boot

-New T304 Stainless steel T-Bolt clamps

 

For replacing the factory grid heater and intake mouth piece.

From the factory, every Roxor leaks boost from new. Which is loss of power and efficiency from the turbo to the engine. We have found this leak at as low as 2 psi of boost pressure. We found the factory pieces to be “egg” shaped or “out of round” and the mounting plates to be “warped” or not completely flat.

Our new pieces are CNC machined to tight specifications, completely flat and have internal O-rings for ultimate securement to the factory intake. We utilize the factory Grid heater for those cold start ups.  This is a direct bolt on piece that also utilizes the factory hold down bracket.

The top is a larger 2 ¼” pipe with “bead roll” compared to the factory smooth 2” round surface. We include the new Silicone Boot and clamps that will allow for easy connection. The Silicone boot may need to be trimmed to size for length, this can be done easily with a razor knife.

Fits Roxor 2018, 2019 & 2020

Additional information

Weight 6 lbs
Dimensions 8 × 8 × 6 in
0